Hier werden die Unterschiede zwischen zwei Versionen angezeigt.
Beide Seiten der vorigen RevisionVorhergehende ÜberarbeitungNächste Überarbeitung | Vorhergehende Überarbeitung | ||
anleitungen:bauanleitungen:modul_relais_530de [2021/03/27 12:46] – [Optionale Erweiterungen] moba_nick | anleitungen:bauanleitungen:modul_relais_530de [2023/03/04 18:27] (aktuell) – Externe Bearbeitung 127.0.0.1 | ||
---|---|---|---|
Zeile 31: | Zeile 31: | ||
==== Stückliste ==== | ==== Stückliste ==== | ||
- | ^ Anzahl | + | ^ Anzahl |
| 1 | Platine | Platine mit Revision 1.1 oder neuer | 530a-Modul WS2811 Relais | | | | 1 | Platine | Platine mit Revision 1.1 oder neuer | 530a-Modul WS2811 Relais | | | ||
| 2 | C1, C2 | Elko, radial, 470 µF, 16 V, RM 3,5 | [[https:// | | 2 | C1, C2 | Elko, radial, 470 µF, 16 V, RM 3,5 | [[https:// | ||
| 2 | C1R, C2R | Keramikkondensator, | | 2 | C1R, C2R | Keramikkondensator, | ||
| 1 | CON1 | Wannenstecker, | | 1 | CON1 | Wannenstecker, | ||
+ | | 1 | CON1 | Pfostenbuchse, | ||
| 2 | IC1, IC2 | IC-Sockel 16-polig für IC1 und IC2 | [[https:// | | 2 | IC1, IC2 | IC-Sockel 16-polig für IC1 und IC2 | [[https:// | ||
| 2 | ::: | ULN2003AN - Seven-Darlington-Arrays, | | 2 | ::: | ULN2003AN - Seven-Darlington-Arrays, | ||
Zeile 42: | Zeile 43: | ||
| 3 | LED8, LED10, LED12 | LED, 3 mm, grün | [[https:// | | 3 | LED8, LED10, LED12 | LED, 3 mm, grün | [[https:// | ||
| 3 | LED9, LED11, LED13 | LED, 3mm, rot | [[https:// | | 3 | LED9, LED11, LED13 | LED, 3mm, rot | [[https:// | ||
- | | 6 | OUT_A, OUT_B, OUT_C, \\ OUT_D, OUT_E, OUT_F, \\ OUT_G, Out_H | Stiftleiste - 3-pol, RM 3,5 mm, 90° | [[https:// | + | | 6 | OUT_A, OUT_B, OUT_C, \\ OUT_D, OUT_E, OUT_F | Stiftleiste - 3-polig, RM 3,5 mm, 90° | [[https:// |
- | | 1 | ::: | Steckbare Schraubklemme - 3-pol, RM 3,5 mm, 0° | [[https:// | + | | 6 | ::: | Steckbare Schraubklemme - 3-polig, RM 3,5 mm, 0° | [[https:// |
| 1 | OPT_LED | Wannenstecker, | | 1 | OPT_LED | Wannenstecker, | ||
| 2 | R1, R2 | Widerstand, 150 Ohm, 0.6W, 1% \\ Braun-Grün-Schwarz-Schwarz-**Braun** | [[https:// | | 2 | R1, R2 | Widerstand, 150 Ohm, 0.6W, 1% \\ Braun-Grün-Schwarz-Schwarz-**Braun** | [[https:// | ||
Zeile 51: | Zeile 52: | ||
- | Der [[https:// | + | Der [[https:// |
<WRAP pagebreak></ | <WRAP pagebreak></ | ||
=== Stücklistenalternativen === | === Stücklistenalternativen === | ||
- | ^ Anzahl | + | ^ Anzahl |
- | | 2 | C1R, C2R | Keramikkondensator, | + | | 2 | C1R, C2R | Keramikkondensator, |
- | | 8 | J1, J2, J3, J4, J5, J6, J8, J9 | Stiftleiste, | + | | 6 | J1, J2, J3, J4, J5, J6 | Stiftleiste, |
- | | 3 | K1_AB, K1_CD, K1_EF | Bistabiles Relais - HFD2-L, 2xUM | Reichelt | + | | 3 | K1_AB, K1_CD, K1_EF | Bistabiles Relais - HFD2-L, 2xUM | [[https:// |
- | | 3 | K2_AB, K2_CD, K2_EF | Monostabiles Relais - HFD2 5V, 2xUM | Reichelt | + | | 3 | K2_AB, K2_CD, K2_EF | Monostabiles Relais - HFD2 5V, 2xUM | [[https:// |
- | | 3 | K2_AB, K2_CD, K2_EF | Monostabiles Relais - G5V-2 5V 5V, 2xUM | Reichelt | + | | 3 | K2_AB, K2_CD, K2_EF | Monostabiles Relais - G5V-2 5V 5V, 2xUM | [[https:// |
- | | 2 | U2R, U4R | WS2811 DIP | [[https:// | + | | 2 | U2R, U4R | WS2811 DIP | [[https:// |
=== Optionale Erweiterungen === | === Optionale Erweiterungen === | ||
- | ^ Anzahl | + | ^ Anzahl |
- | | 2 | C3H, C3H1 | Keramikkondensator, | + | | 2 | C3H, C3H1 | Keramikkondensator, |
- | | 2 | C3R, C3R1 | Keramikkondensator, | + | | 2 | C3R, C3R1 | Keramikkondensator, |
- | | 2 | K_RES_G, K_GES_H | G5V1 | Reichelt | + | | 2 | K_RES_G, K_GES_H | G5V1 | [[https:// |
- | | 3 | LED1, LED3, LED5 | LED3MM, grün | Reichelt | + | | 3 | LED1, LED3, LED5 | LED3MM, grün | [[https:// |
- | | 3 | LED2, LED4, LED6 | LED3MM, rot | Reichelt | + | | 3 | LED2, LED4, LED6 | LED3MM, rot | [[https:// |
- | | 1 | OPT_LED | Wannenstecker, | + | | 1 | OPT_LED | Wannenstecker, |
- | | 2 | OUT_G, OUT_H | Stiftleiste - 3-pol, RM 3,5 mm, 90° | Reichelt | + | | 2 | OUT_G, OUT_H | Stiftleiste - 3-polig, RM 3,5 mm, 90° | [[https:// |
- | | 2 | OUT_G, OUT_H | Steckbare Schraubklemme - 3-pol, RM 3,5 mm, 0° | Reichelt | + | | 2 | OUT_G, OUT_H | Steckbare Schraubklemme - 3-polig, RM 3,5 mm, 0° | [[https:// |
- | | 6 | R3, R4, R5, R6, R7, R8 | Widerstand, 470Ω, 0.6W, 1% \\ Gelb-Lila-Schwarz-Schwarz–**Braun** | + | | 6 | R3, R4, R5, R6, R7, R8 | Widerstand, 470Ω, 0.6W, 1% \\ Gelb-Lila-Schwarz-Schwarz–**Braun** | [[https:// |
- | | 2 | R10, R11 | Widerstand, 150Ω, 0.6W, 1% \\ Braun-Grün-Schwarz-Schwarz--**Braun** | + | | 2 | R10, R11 | Widerstand, 150Ω, 0.6W, 1% \\ Braun-Grün-Schwarz-Schwarz--**Braun** | [[https:// |
- | | 1 | SV3 | Stiftleiste, | + | | 1 | SV3 | Stiftleiste, |
- | | 1 | SV4 | Buchsenleiste, | + | | 1 | SV4 | Buchsenleiste, |
- | | 2 | U5R, U7R | WS2811 DIP | eBay, AliExpress, Amazon | | + | | 2 | U5R, U7R | WS2811 DIP | | Für die zusätzlichen WS2811 notwendig \\ Alternative für U6H, U8H | |
- | | 2 | U6H, U8H | WS2811 - SOP8 | eBay, AliExpress, Amazon | + | | 2 | U6H, U8H | WS2811 - SOP8 | [[https:// |
Zeile 152: | Zeile 153: | ||
und der Standardkonfiguration mit sechs Relais 1xUM ausgelegt. \\ | und der Standardkonfiguration mit sechs Relais 1xUM ausgelegt. \\ | ||
[[# | [[# | ||
- | ^ Anzahl | + | ^ Anzahl |
- | | 1 | Board | Platine 530 | Alfred | | + | | 1 | Board | Platine 530 | 530a-Modul WS2811 Relais | | |
- | | 2 | C1, C2 | Elektrolytkondensator, | + | | 2 | C1, C2 | Elektrolytkondensator, |
- | | 3 | C1H, C2H, C3H | Keramikkondensator, | + | | 3 | C1H, C2H, C3H | Keramikkondensator, |
- | | 1 | CON1 | Wannenstecker, | + | | 1 | CON1 | Wannenstecker, |
- | | 10 | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10 | Gleichrichterdiode, | + | | 1 | CON1 | Pfostenbuchse, 6-polig | [[https:// |
- | | 2 | D11, D12 | Schottkydiode, | + | | 10 | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10 | Gleichrichterdiode, |
- | | 2 | IC1, IC2 | Sockel für IC1 & IC2 | Reichelt | + | | 2 | D11, D12 | Schottkydiode, |
- | | 2 | IC1, IC2 | ULN2003AN | Reichelt | + | | 2 | IC1, IC2 | Sockel für IC1 & IC2 | [[https:// |
- | | 3 | K2_AB, K2_CD, K2_EF | Bistabiles Relais - HFD2-L, 2xUM | Reichelt | + | | 2 | IC1, IC2 | ULN2003AN |
- | | 1 | K_RES_G | G5V1 | Reichelt | + | | 3 | K2_AB, K2_CD, K2_EF | Bistabiles Relais - HFD2-L, 2xUM | [[https:// |
- | | 1 | LED7 | LED3MM, gelb | Reichelt | + | | 1 | K_RES_G | G5V1 | [[https:// |
- | | 3 | LED8, LED10, LED12 | LED3MM, grün | Reichelt | + | | 1 | LED7 | LED3MM, gelb | [[https:// |
- | | 3 | LED9, LED11, LED13 | LED3MM, rot | Reichelt | + | | 3 | LED8, LED10, LED12 | LED3MM, grün | [[https:// |
- | | 1 | ABC | Stiftleiste - 4-pol, RM 3,5 mm, 90° | Reichelt | RND 205-00113 | 0,25 € | Alternativen: | + | | 3 | LED9, LED11, LED13 | LED3MM, rot | [[https:// |
- | | 1 | ABC | Steckbare Schraubklemme - 3-pol, RM 3,5 mm, 0° | Reichelt | RND 205-00091 | | + | | 1 | ABC | Stiftleiste - 4-polig, RM 3,5 mm, 90° | [[https:// |
- | | 3 | R1, R2, R10 | Widerstand, 150 Ohm, 0.6W, 1% \\ Braun-Grün-Schwarz-Schwarz--Braun | Reichelt | Metall | + | | 1 | ABC | Steckbare Schraubklemme - 3-polig, RM 3,5 mm, 0° | [[https:// |
- | | 7 | R9, R12, R13,R14, R15, R16, R17 | Widerstand, 470 Ohm, 0.6W, 1% \\ Gelb-Lila-Schwarz-Schwarz--Braun | Reichelt | Metall | + | | 3 | R1, R2, R10 | Widerstand, 150 Ohm, 0.6W, 1% \\ Braun-Grün-Schwarz-Schwarz--Braun | [[https:// |
- | | 2 | RN1, RN2 | Widerstandsnetzwerk, | + | | 7 | R9, R12, R13,R14, R15, R16, R17 | Widerstand, 470 Ohm, 0.6W, 1% \\ Gelb-Lila-Schwarz-Schwarz--Braun | [[https:// |
- | | 3 | U3H, U5H, U6H | WS2811 - SOP8 | eBay, AliExpress, Amazon | + | | 2 | RN1, RN2 | Widerstandsnetzwerk, |
+ | | 3 | U3H, U5H, U6H | WS2811 - SOP8 | [[https:// | ||
- | Der [[https:// | + | Der [[https:// |
<WRAP pagebreak></ | <WRAP pagebreak></ | ||
=== Stücklistenalternativen === | === Stücklistenalternativen === | ||
- | ^ Anzahl | + | ^ Anzahl |
- | | 3 | C1R, C2R, C3R | Keramikkondensator, | + | | 3 | C1R, C2R, C3R | Keramikkondensator, |
- | | 1 | J7 | Stiftleiste, | + | | 1 | J7 | Stiftleiste, |
- | | 3 | K1_AB, K1_CD, K1_EF | Monostabiles Relais - HFD2 5V, 2xUM | Reichelt | + | | 3 | K1_AB, K1_CD, K1_EF | Monostabiles Relais - HFD2 5V, 2xUM | [[https:// |
- | | 3 | U2R, U4R | WS2811 DIP | eBay, AliExpress, Amazon | | | + | | 3 | U2R, U4R, U5R | WS2811 DIP | | Alternative für U3H, U5H & U6H | |
=== Optionale Erweiterungen === | === Optionale Erweiterungen === | ||
- | ^ Anzahl | + | ^ Anzahl |
- | | 1 | C3H1 | Keramikkondensator, | + | | 1 | C3H1 | Keramikkondensator, |
- | | 1 | C3R1 | Keramikkondensator, | + | | 1 | C3R1 | Keramikkondensator, |
- | | 1 | OPT_LED | Wannenstecker, | + | | 1 | OPT_LED | Wannenstecker, |
- | | 1 | R11 | Widerstand, 150 Ohm, 0.6W, 1% | Reichelt | Metall | + | | 1 | R11 | Widerstand, 150Ω, 0.6W, 1% \\ Braun-Grün-Schwarz-Schwarz--**Braun** |
- | | 1 | SV3 | Stiftleiste, | + | | 1 | SV3 | Stiftleiste, |
- | | 1 | SV4 | Buchsenleiste, | + | | 1 | SV4 | Buchsenleiste, |
- | | 1 | U7R | WS2811 DIP | eBay, AliExpress, Amazon | | | + | | 1 | U7R | WS2811 DIP | | Für die zusätzlichen WS2811 notwendig \\ Alternative für U8H | |
- | | 1 | U8H | WS2811 - SOP8 | eBay, AliExpress, Amazon | + | | 1 | U8H | WS2811 - SOP8 | [[https:// |
Zeile 271: | Zeile 273: | ||
====== Lötjumper ====== | ====== Lötjumper ====== | ||
+ | ===== Fehlerteufel ===== | ||
+ | Leider hat sich im Layout der Platinenversionen 1.0 und 1.1 eine Fehler eingeschlichen. \\ | ||
+ | Es ist nicht möglich die Platinen über die Randstecker direkt miteinander zu verbinden, da die Leitung DO des letzten WS2811 leider direkt an die Datenrückleitung | ||
+ | |||
+ | ===== Lötjumper ===== | ||
^ Lötjumper | ^ Lötjumper | ||
| 6=5V | verbindet die 5V-Leitung mit dem Pin6 vom Wannenstecker „CON1“. Nicht verbinden wenn am Pin6 mehr als 5V eingespeist werden. | | | 6=5V | verbindet die 5V-Leitung mit dem Pin6 vom Wannenstecker „CON1“. Nicht verbinden wenn am Pin6 mehr als 5V eingespeist werden. | |