Logo MobaLedLib Wiki

Benutzer-Werkzeuge

Webseiten-Werkzeuge

Zuletzt angesehen: • robots.txt • tiny-uniprog • betaversion
anleitungen:spezial:betaversion

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

Link zu dieser Vergleichsansicht

Beide Seiten der vorigen RevisionVorhergehende Überarbeitung
Nächste Überarbeitung		Vorhergehende Überarbeitung
anleitungen:spezial:betaversion [2025/04/24 16:23] – gelöscht - Externe Bearbeitung (Unbekanntes Datum) 127.0.0.1anleitungen:spezial:betaversion [2025/05/29 17:15] (aktuell) – Beta 3.4.0A petervt11
Zeile 1: Zeile 1:
 +3.4.0A
 +    29.05.25:  Verbesserungen:
 +              - Misha's Erweiterungen, um Led-Kanalauswahl mit Multiplexer Makro zu ermöglichen
 +              - einige Prüfungen für Pico-Plattform hinzugefügt
 +              - experimentelle Lichtsensor Unterstützung für Pico-Plattform (LDR)
 +              - Hilfe-Link im PatternConfigurator angepasst 
 +            
 +               Fehlerbehebungen:
 +              - Fehler bei Export in Datei Problem „Fehler... beim Speichern einer MLL-Datei (.pgf)“ siehe viewtopic.php?t=134
 +              - Last rebuild failed - Tastendruck erforderlich siehe viewtopic.php?t=182
 +              - Fehlermeldung beim Erstellen einer Pushbuttonfunktion siehe viewtopic.php?t=193
 +              - Fehlermeldung bei Random-Befehlen siehe viewtopic.php?t=161
 +              - Fehler beim Kopieren von versteckten Blättern behoben siehe viewtopic.php?p=1538
 +              - Fehler beim Kopieren von Blatt zu Blatt behoben
 +    
 +3.3.2G
 +    23.04.25: - add FastLED revive and fault display feature
 +              - improve ESP32 startup time
 +              - limit ESP32 RMT channels to 6
 +              - improve counting and display of freezes/delays
 +              - remove limit ESP32 RMT channels
 +              - fix bug with wrong send buffer size for SEND_INPUTS 
 +                Siehe auch die neue Version 3.4.0 
 +
 +3.3.2E
 +    18.12.24: - fix issue: "ESP32 and hieroglyphics for MLL time" To-Dos#20
 +              - reset the ESP32 watchdog while in color-test loop
 +              - for Pico change DCC_SIGNAL_PIN from 22 to 28, DCC_SIGNAL_PIN may also be set externally
 +
 +3.3.2C
 +    22.09.24: - Added the "#define USE_SX_INTERFACE" line back to modul M06_Write_Header. For some readins this line
 +                has been removed from 3.3.2 to 3.3.2C. It is importand to use Selectrix
 +              - change to beta 3.3.2C
 +              - LEDs_AutoProg.ino: Changed the selectrix pin definitions:
 +                  #define SX_SIGNAL_PIN 13   // 22.09.24:  Old: 4
 +                  #define SX_CLOCK_PIN  4    // 22.09.24:  Old: 13
 +                Now they should work with the ESP32 Adapter and the new ESP32 mainboard
 +              - Attention: With FastLED version 3.4.0 the WS2812 LEDs sometimes flash when quick changes to the
 +                locomotive speed are made. With version 3.6.0 and higher this no longer occurs.
 +
 +3.3.2B
 +    10.03.24: - add SI_LocalVar to predefined system variables
 +              - add replacement of "$" in macro arguments         https://www.stummiforum.de/t165060f7-MobaLedLib-LEDs-Servos-Sound.html#msg2643729
 +              - force a rebuild if ALT key is pressed
 +              - empty compiler cache if last ATMega build failed  https://www.stummiforum.de/t222466f195-MobaLedLib-Arduino-Upload-geht-nicht.html#msg2649211
 +              - import latest version of GetLocalOneDrivePath script from https://gist.github.com/guwidoe/038398b6be1b16c458365716a921814d
 +
 +3.3.2A
 +    29.12.23: - keep active sheet on Update_All_Start_LedNr function exit
 +    18.01.24: - new function SafeChDriveAndDir with Additional check for network drives (#11425)
 +    19.01.24: - improved selection of old prog generator filename when updating to new release/beta
 +              - add experimental support of LNet for ESP32
 +    20.01.24: - fix LastFilledRowIn_ChkAll
 +              - fix detection of first RGB_Heartbeat line while import
 +              - change release to beta 3.3.2A
 +
 +3.2.1A
 +    04.11.22 fix SwitchC issue with ESP32
 +3.2.1B
 +    20.12.22 add missing code for old "slow" build
 +    21.12.22 fix issue that AVR build fails caused by vbcr in LEDs_Autoprog.h -> replace by vbcrlf
 +
 +3.2.1C
 +    21.12.22 add missing macros InCh_to_LocalVar, InCh_to_LocalVar1 and Bin_InCh_to_TmpVar1 to sheet Lib_Macros
 +    05.01.23 Store_Status: support SwitchB, extend max. InCnt to 63, check max InCnt, use Set_Input for SwitchB
 +    14.01.23 Add macro SingleLedSignal and SingleLedSignalEx
 +    
 +3.2.1D    
 +    10.03.23 Support of new input type "feedback"
 +    10.03.23 process CAN messages from ATTiny_CAN_GBM module
 +    10.03.23 new macro include to include excel sub sheets
 +    10.03.23 experimental support of ProgGenerator stored in a Onedrive folder
 +    21.03.23 if SEND_INPUT is enabled also SwitchA, SwitchD and Variable changes are notified
 +    09.04.23 GEN_BUTTON_RELASE mode are now setable in config sheet
 +    18.04.23 Finalize include sheet feature
 +    26.05.23 fix issue that AVR build fails caused by vbcr in LEDs_Autoprog.h -> replace by vbcrlf
 +    
 +3.2.1E
 +    18.05.23: - LNet support for Arduino platform added
 +    13.09.23: - Hardi: Merged Hardis changes for the Word Clock
 +                Added OutCnt to the MLL Extentions
 +                Don't generate warning if "Pattern" macro is found
 +                Added define COPYLED_OFF and COPYLED_OFF_ONCE
 +                
 +3.2.1F
 +    15.09.23: - New Macro Set_LEDNr added
 +    18.09.23: - New Macro CopyNLEDs added
 +    20.10.23: - Juergen: fix #10763
 +    23.10.23: - Juergen: revert one of Hardis changes - fixes problem #10 reported by Nessie 
 +   
 +3.2.1H   
 +    29.11.23: - Hardi:New Icons from Michael
 +
 +3.2.1I
 +    30.11.23: - Hardi: Added Juergens changes again
 +
 +3.2.1J    
 +    
 +    04.11.23: - Juergen: fix #10159 - fastbuild.cmd has wrong Unix line ending
 +    04.12.23: - Juergen ensure that included sheet uses same protocol as the main sheet
 +    09.12.23: - Juergen add experimental support of ATMega328PB
 +              - enable bootloader update without need to set jumpers (Mainboard version >= 1.8.2)
  

Seiten-Werkzeuge

Falls nicht anders bezeichnet, ist der Inhalt dieses Wikis unter der folgenden Lizenz veröffentlicht: CC Attribution-Share Alike 4.0 International
CC Attribution-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki