Benutzer-Werkzeuge

Webseiten-Werkzeuge


spezial:betaversion

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

Link zu dieser Vergleichsansicht

Nächste Überarbeitung
Vorhergehende Überarbeitung
spezial:betaversion [2022/03/31 15:46] – angelegt moba_nickspezial:betaversion [2024/10/23 16:44] (aktuell) hardi
Zeile 1: Zeile 1:
-<WRAP center round todo 60%> +3.3.2C 
-Hier entsteht die Revisionshistory der Betavesionen +    22.09.24: - Added the "#define USE_SX_INTERFACE" line back to modul M06_Write_Header. For some readins this line 
-</WRAP>+                has been removed from 3.3.2 to 3.3.2C. It is importand to use Selectrix 
 +              - change to beta 3.3.2C 
 +              - LEDs_AutoProg.ino: Changed the selectrix pin definitions: 
 +                  #define SX_SIGNAL_PIN 13   // 22.09.24:  Old: 4 
 +                  #define SX_CLOCK_PIN  4    // 22.09.24:  Old: 13 
 +                Now they should work with the ESP32 Adapter and the new ESP32 mainboard 
 +              - Attention: With FastLED version 3.4.0 the WS2812 LEDs sometimes flash when quick changes to the 
 +                locomotive speed are made. With version 3.6.0 and higher this no longer occurs. 
 + 
 +3.3.2B 
 +    10.03.24: - add SI_LocalVar to predefined system variables 
 +              - add replacement of "$" in macro arguments         https://www.stummiforum.de/t165060f7-MobaLedLib-LEDs-Servos-Sound.html#msg2643729 
 +              - force a rebuild if ALT key is pressed 
 +              - empty compiler cache if last ATMega build failed  https://www.stummiforum.de/t222466f195-MobaLedLib-Arduino-Upload-geht-nicht.html#msg2649211 
 +              - import latest version of GetLocalOneDrivePath script from https://gist.github.com/guwidoe/038398b6be1b16c458365716a921814d 
 + 
 +3.3.2A 
 +    29.12.23: - keep active sheet on Update_All_Start_LedNr function exit 
 +    18.01.24: - new function SafeChDriveAndDir with Additional check for network drives (#11425) 
 +    19.01.24: - improved selection of old prog generator filename when updating to new release/beta 
 +              - add experimental support of LNet for ESP32 
 +    20.01.24: - fix LastFilledRowIn_ChkAll 
 +              - fix detection of first RGB_Heartbeat line while import 
 +              - change release to beta 3.3.2A 
 + 
 +3.2.1A 
 +    04.11.22 fix SwitchC issue with ESP32 
 +3.2.1B 
 +    20.12.22 add missing code for old "slow" build 
 +    21.12.22 fix issue that AVR build fails caused by vbcr in LEDs_Autoprog.h -> replace by vbcrlf 
 + 
 +3.2.1C 
 +    21.12.22 add missing macros InCh_to_LocalVar, InCh_to_LocalVar1 and Bin_InCh_to_TmpVar1 to sheet Lib_Macros 
 +    05.01.23 Store_Status: support SwitchB, extend max. InCnt to 63, check max InCnt, use Set_Input for SwitchB 
 +    14.01.23 Add macro SingleLedSignal and SingleLedSignalEx 
 +     
 +3.2.1D     
 +    10.03.23 Support of new input type "feedback" 
 +    10.03.23 process CAN messages from ATTiny_CAN_GBM module 
 +    10.03.23 new macro include to include excel sub sheets 
 +    10.03.23 experimental support of ProgGenerator stored in a Onedrive folder 
 +    21.03.23 if SEND_INPUT is enabled also SwitchA, SwitchD and Variable changes are notified 
 +    09.04.23 GEN_BUTTON_RELASE mode are now setable in config sheet 
 +    18.04.23 Finalize include sheet feature 
 +    26.05.23 fix issue that AVR build fails caused by vbcr in LEDs_Autoprog.h -> replace by vbcrlf 
 +     
 +3.2.1E 
 +    18.05.23: - LNet support for Arduino platform added 
 +    13.09.23: - Hardi: Merged Hardis changes for the Word Clock 
 +                Added OutCnt to the MLL Extentions 
 +                Don't generate warning if "Pattern" macro is found 
 +                Added define COPYLED_OFF and COPYLED_OFF_ONCE 
 +                 
 +3.2.1F 
 +    15.09.23: - New Macro Set_LEDNr added 
 +    18.09.23: - New Macro CopyNLEDs added 
 +    20.10.23: - Juergen: fix #10763 
 +    23.10.23: - Juergen: revert one of Hardis changes - fixes problem #10 reported by Nessie  
 +    
 +3.2.1H    
 +    29.11.23: - Hardi:New Icons from Michael 
 + 
 +3.2.1I 
 +    30.11.23: - Hardi: Added Juergens changes again 
 + 
 +3.2.1J     
 +     
 +    04.11.23: - Juergen: fix #10159 - fastbuild.cmd has wrong Unix line ending 
 +    04.12.23: - Juergen ensure that included sheet uses same protocol as the main sheet 
 +    09.12.23: - Juergen add experimental support of ATMega328PB 
 +              - enable bootloader update without need to set jumpers (Mainboard version >= 1.8.2)
  
spezial/betaversion.1648741601.txt.gz · Zuletzt geändert: 2022/03/31 16:46 (Externe Bearbeitung)