Benutzer-Werkzeuge

Webseiten-Werkzeuge


spezial:betaversion

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

Link zu dieser Vergleichsansicht

Beide Seiten der vorigen RevisionVorhergehende Überarbeitung
Nächste Überarbeitung
Vorhergehende Überarbeitung
spezial:betaversion [2023/05/26 14:16] jueffspezial:betaversion [2024/10/23 16:44] (aktuell) hardi
Zeile 1: Zeile 1:
 +3.3.2C
 +    22.09.24: - Added the "#define USE_SX_INTERFACE" line back to modul M06_Write_Header. For some readins this line
 +                has been removed from 3.3.2 to 3.3.2C. It is importand to use Selectrix
 +              - change to beta 3.3.2C
 +              - LEDs_AutoProg.ino: Changed the selectrix pin definitions:
 +                  #define SX_SIGNAL_PIN 13   // 22.09.24:  Old: 4
 +                  #define SX_CLOCK_PIN  4    // 22.09.24:  Old: 13
 +                Now they should work with the ESP32 Adapter and the new ESP32 mainboard
 +              - Attention: With FastLED version 3.4.0 the WS2812 LEDs sometimes flash when quick changes to the
 +                locomotive speed are made. With version 3.6.0 and higher this no longer occurs.
 +
 +3.3.2B
 +    10.03.24: - add SI_LocalVar to predefined system variables
 +              - add replacement of "$" in macro arguments         https://www.stummiforum.de/t165060f7-MobaLedLib-LEDs-Servos-Sound.html#msg2643729
 +              - force a rebuild if ALT key is pressed
 +              - empty compiler cache if last ATMega build failed  https://www.stummiforum.de/t222466f195-MobaLedLib-Arduino-Upload-geht-nicht.html#msg2649211
 +              - import latest version of GetLocalOneDrivePath script from https://gist.github.com/guwidoe/038398b6be1b16c458365716a921814d
 +
 +3.3.2A
 +    29.12.23: - keep active sheet on Update_All_Start_LedNr function exit
 +    18.01.24: - new function SafeChDriveAndDir with Additional check for network drives (#11425)
 +    19.01.24: - improved selection of old prog generator filename when updating to new release/beta
 +              - add experimental support of LNet for ESP32
 +    20.01.24: - fix LastFilledRowIn_ChkAll
 +              - fix detection of first RGB_Heartbeat line while import
 +              - change release to beta 3.3.2A
 +
 3.2.1A 3.2.1A
     04.11.22 fix SwitchC issue with ESP32     04.11.22 fix SwitchC issue with ESP32
Zeile 19: Zeile 46:
     18.04.23 Finalize include sheet feature     18.04.23 Finalize include sheet feature
     26.05.23 fix issue that AVR build fails caused by vbcr in LEDs_Autoprog.h -> replace by vbcrlf     26.05.23 fix issue that AVR build fails caused by vbcr in LEDs_Autoprog.h -> replace by vbcrlf
 +    
 +3.2.1E
 +    18.05.23: - LNet support for Arduino platform added
 +    13.09.23: - Hardi: Merged Hardis changes for the Word Clock
 +                Added OutCnt to the MLL Extentions
 +                Don't generate warning if "Pattern" macro is found
 +                Added define COPYLED_OFF and COPYLED_OFF_ONCE
 +                
 +3.2.1F
 +    15.09.23: - New Macro Set_LEDNr added
 +    18.09.23: - New Macro CopyNLEDs added
 +    20.10.23: - Juergen: fix #10763
 +    23.10.23: - Juergen: revert one of Hardis changes - fixes problem #10 reported by Nessie 
 +   
 +3.2.1H   
 +    29.11.23: - Hardi:New Icons from Michael
 +
 +3.2.1I
 +    30.11.23: - Hardi: Added Juergens changes again
 +
 +3.2.1J    
 +    
 +    04.11.23: - Juergen: fix #10159 - fastbuild.cmd has wrong Unix line ending
 +    04.12.23: - Juergen ensure that included sheet uses same protocol as the main sheet
 +    09.12.23: - Juergen add experimental support of ATMega328PB
 +              - enable bootloader update without need to set jumpers (Mainboard version >= 1.8.2)
  
spezial/betaversion.1685110615.txt.gz · Zuletzt geändert: 2023/05/26 15:16 (Externe Bearbeitung)