Hier werden die Unterschiede zwischen zwei Versionen angezeigt.
| Beide Seiten der vorigen RevisionVorhergehende ÜberarbeitungNächste Überarbeitung | Vorhergehende Überarbeitung | ||
| spezial:user:theo:hauptplatine_uno_tmaa [2023/10/09 12:36] – [Gerber-Dateien] tmaa | spezial:user:theo:hauptplatine_uno_tmaa [2025/07/03 11:44] (aktuell) – [Stückliste v1.2] tmaa | ||
|---|---|---|---|
| Zeile 13: | Zeile 13: | ||
| * USB | * USB | ||
| * UNO R3 (Extern 7 - 12V) | * UNO R3 (Extern 7 - 12V) | ||
| - | * DCC (galvanisch getrennt) | + | * DCC (galvanisch getrennt) |
| + | * LNet interface | ||
| * 100 % kompatibel mit der Original-MobaLedLib Software | * 100 % kompatibel mit der Original-MobaLedLib Software | ||
| * Die drei bekannten Taster mit zugehörigen LED's | * Die drei bekannten Taster mit zugehörigen LED's | ||
| * Analoge Verbindung (5V, GND und A0 bis A5) | * Analoge Verbindung (5V, GND und A0 bis A5) | ||
| - | * Digitale Verbindung (5V, GND, D2 und D7 bis D12) ... Externe Schnittstelle in Vorbereitung ;-) (Behalten Sie die MobaLedLib-Seite im Stummiforum im Auge) | + | * Digitale Verbindung (5V, GND, D2 und D7 bis D12) |
| * Und ... MLL-Bus (D6) | * Und ... MLL-Bus (D6) | ||
| Zeile 26: | Zeile 27: | ||
| * Version 1.2 ist mit der Vorgängerversion 1.1 kompatibel | * Version 1.2 ist mit der Vorgängerversion 1.1 kompatibel | ||
| * **J1** entfernt (war völlig sinnlos) | * **J1** entfernt (war völlig sinnlos) | ||
| - | * **C9*** Bauform angepasst von SMD auf Through-hole (LDR- und Analog-Key-Setup mit „normalen“ komponenten möglich) | + | * **C9*** und **R14*** Bauform angepasst von SMD auf Through-hole (LDR- und Analog-Key-Setup mit „normalen“ komponenten möglich) |
| * **R21*** neu positioniert | * **R21*** neu positioniert | ||
| * **F1** (2,5A) hinzugefügt | * **F1** (2,5A) hinzugefügt | ||
| Zeile 37: | Zeile 38: | ||
| **Lage der Komponenten** (v1.2) | **Lage der Komponenten** (v1.2) | ||
| - | {{ : | + | {{ : |
| <WRAP info round centeralign 600 center 80%> | <WRAP info round centeralign 600 center 80%> | ||
| Zeile 49: | Zeile 50: | ||
| ^ Anzahl | ^ Anzahl | ||
| - | | 1 | Platine | MobaLedLib UNO DCC LocoNet | + | | 1 | Platine | MobaLedLib UNO DCC LNet v1.2 | Theo ((Anfrage für eine Platine kann per PN an [[https://forum.mobaledlib.de/ |
| | 5 | C1, C2, C3, C4, C5 | SMD-Vielschicht-Keramikkondensator 100N, 10% | [[https:// | | 5 | C1, C2, C3, C4, C5 | SMD-Vielschicht-Keramikkondensator 100N, 10% | [[https:// | ||
| | 2 | C6, C7 | SMD-Vielschicht-Keramikkondensator 22P, 5% | [[https:// | | 2 | C6, C7 | SMD-Vielschicht-Keramikkondensator 22P, 5% | [[https:// | ||
| Zeile 69: | Zeile 70: | ||
| | 2 | J2, J3 | Stiftleisten 2,54 mm, 1X02, gerade | [[https:// | | 2 | J2, J3 | Stiftleisten 2,54 mm, 1X02, gerade | [[https:// | ||
| | 1 | L1 | LED, SMD 0805, rot, 112 mcd, 140° | [[https:// | | 1 | L1 | LED, SMD 0805, rot, 112 mcd, 140° | [[https:// | ||
| - | | 1 | L2 | LED, SMD 0805, orange, 112 mcd, 140° | [[https:// | + | | 1 | L2 | LED, SMD 0805, orange, 112 mcd, 140° | [[https:// |
| | 1 | L3 | LED, SMD 0805, gelb, 38 mcd, 140° | [[https:// | | 1 | L3 | LED, SMD 0805, gelb, 38 mcd, 140° | [[https:// | ||
| | 1 | L4 | LED, SMD 0805, weiß, 140 mcd, 150° | [[https:// | | 1 | L4 | LED, SMD 0805, weiß, 140 mcd, 150° | [[https:// | ||
| Zeile 75: | Zeile 76: | ||
| | 2 | L6, L7 | WS2812B Leds DC5V | [[https:// | | 2 | L6, L7 | WS2812B Leds DC5V | [[https:// | ||
| | 1 | Q1 | SMD-Quarz, Grundton, 16,000000 MHz | [[https:// | | 1 | Q1 | SMD-Quarz, Grundton, 16,000000 MHz | [[https:// | ||
| - | | 1 | R1 | SMD-Widerstand, | + | | 1 | R1 | SMD-Widerstand, |
| - | | 3 | R2, R10, R17 | SMD-Widerstand, | + | | 3 | R2, R10, R17 | SMD-Widerstand, |
| - | | 4 | R3, R12, R18, R19 | SMD-Widerstand, | + | | 4 | R3, R12, R18, R19 | SMD-Widerstand, |
| - | | 1 | R4 | SMD-Widerstand, | + | | 1 | R4 | SMD-Widerstand, |
| - | | 1 | R5 | SMD-Widerstand, | + | | 1 | R5 | SMD-Widerstand, |
| - | | 1 | R6 | SMD-Widerstand, | + | | 1 | R6 | SMD-Widerstand, |
| - | | 1 | R7 | SMD-Widerstand, | + | | 1 | R7 | SMD-Widerstand, |
| - | | 1 | R8 | SMD-Widerstand, | + | | 1 | R8 | SMD-Widerstand, |
| - | | 1 | R9 | SMD-Widerstand, | + | | 1 | R9 | SMD-Widerstand, |
| - | | 1 | R11 | SMD-Widerstand, | + | | 1 | R11 | SMD-Widerstand, |
| - | | 1 | R13 | SMD-Widerstand, | + | | 1 | R13 | SMD-Widerstand, |
| | 1 | R14* | | | Siehe Day/Night Sensor (LDR) Tabelle | 3 | | | 1 | R14* | | | Siehe Day/Night Sensor (LDR) Tabelle | 3 | | ||
| - | | 2 | R15, R16 | SMD-Widerstand, | + | | 2 | R15, R16 | SMD-Widerstand, |
| | 1 | R20* | | | N/A (Rückseite der Platine) | - | | | 1 | R20* | | | N/A (Rückseite der Platine) | - | | ||
| | 1 | R21* | SMD-Widerstand, | | 1 | R21* | SMD-Widerstand, | ||
| Zeile 144: | Zeile 145: | ||
| ===== Gerber-Dateien ===== | ===== Gerber-Dateien ===== | ||
| - | * Zur Eigenfertigung der Leiterplatten, | + | * Zur Eigenfertigung der Leiterplatten, |
| + | |||
| + | <WRAP round box 30%> | ||
| + | [[https:// | ||
| + | [[https:// | ||
| + | </ | ||
| ---- | ---- | ||
| Zeile 171: | Zeile 177: | ||
| + | |||
| + | <WRAP left box 80%> | ||
| + | |||
| + | ===== Gibt es Fragen oder Anmerkungen? | ||
| + | |||
| + | Klicken Sie einfach auf den Link und Sie werden auf die entsprechende Seite weitergeleitet, | ||
| + | |||
| + | [[https:// | ||
| + | |||
| + | <color # | ||
| + | |||
| + | **Aber wenn Sie einen Tipp für uns haben, würden wir uns auch darüber freuen.**</ | ||
| + | |||
| + | ----- | ||
| ===== Schaltplan ===== | ===== Schaltplan ===== | ||
| - | {{: | ||
| + | {{: | ||